Trolleys for DC chain hoists

Smooth travel, low travel resistance

Trolleys for DC chain hoists

Demag trolleys for chain hoists are a perfect match for DC chain hoists and ideal for installation on I-beam girders or on the modular KBK light crane system. For push travel or with electric positioning – these trolleys provide horizontal travel solutions tailored to meet specific requirements for our compact hoist units.

All trolleys feature a low rolling resistance and smooth travel characteristics over their entire service life. The robust components are perfectly matched and can provide convenient transport solutions for your application needs.

Demag trolleys – the choice is yours:

U type trolleys for manual travel
E type trolleys for low-sway electric travel
Click-fit trolleys that can be clicked into position
Smooth-running KBK trolleys as system components
Low-headroom travelling hoists for optimum utilisation of the available height
Double chain hoist for mechanically synchronised lifting, e.g. for long material or large-volume components

Your Contact

Demagcranes

125 Ye Zhuang Road, European Industrial Zone Zhuanghang Town, Fengxian District
Shanghai 201415
P.R. China

Phone:

+86 21 -6025 9029

Fax:

+86 21-5746 4558

Email:

[email protected]

Contact

Product information

The benefits at a glance

Click-fit trolleys

Simple click-fit installation
Articulated trolleys (minimum curve radius: 800 mm)
Easily adaptable to standard-profile or parallel-flange sections
High safety and reliability thanks to integrated drop-stop and lift-off protection
Universal solutions for loads up to 550 kg
Flange widths from 50 to 91 mm

U/RU push-travel trolleys

Excellent travel characteristics
Fast and simple installation
Can be used on parallel and sloping flanges
Smooth travel, low travel resistance
Negotiate curves down to a minimum radius of 1,000 mm
Drop stop integrated into the side cheek
Extremely low girder wear
Designs with polyamide or steel rollers
Compact, state-of-the-art industrial design.
Four sizes: U 11 up to 1,100 kg, U 22 up to 2,200 kg, U 34 up to 3,.400 kg, RU 56 up to 5,600 kg

E 11 to E 34 electric travel drives

Smooth starting and braking
Low-sway load handling
Fast installation and commissioning
Designed for operation with DC-Pro chain hoists
Control via DSE 10-C/DSE 10-CS control pendants
Fast availability thanks to plug-&-drive: plug-in connection to DC-Pro chain hoists
Simple installation of the control pendant for long/cross travel
Optional accessory: cross-type limit switches for fast-to-slow and final limit-switch cut-off

KBK trolleys

E 22 fitted as standard with RF 125 friction-wheel travel drive for use with KBK light crane system
Particularly short approach dimensions for vertical mounting arrangement

Technical data

Selection table

Max. dis- placeable weight incl. dead load²⁾ [kg]	Travel drive	Travel speed at 50/60 Hz	Possible trolleys	Max. Weight [kg]
Steps	Stepless
V_rated at full load [m/min]	V_max at partial load¹⁾ [m/min]	V at full load [m/min]	V at partial load [m/min]
1,100	E 11	24/6	30/7.5	1.2-24	1.5-30	U 11	4
2,200	E 22-C	24/6	30/7.5	1.2-24	1.5-30	U 22 U 34	5
2,200	E 22-C	27/7	33/8	1.4-27	1.65-33	RF 125	5
3,400	E 34	14/3.5	-	0.7-14	-	U 34	5
5,600	EU 56	12/4 24/6 40/10	-	On application		RU 56	8.8

¹⁾ Possible by programming other parameters
²⁾ Max. displaceable weight/max. gradient 1% > 1% on request

Curve radii for trolleys

Trolleys	Load capacity	Runway girder	Travel wheel material
Push travel	Electric travel
	[kg]	Flange width [mm]	R_min	Flange width [mm]	R_min
CF 5	550	50-91	800	-	-	Plastic
U 11 DC EU 11 DC	1,100	58-310	1,000	58-310	2,000	Plastic ²⁾
U 22 DC EU 22 DC	2,200	74-200⁴⁾	2,000	82-200⁴⁾	3,000	Spheroidal-graphite cast iron ³⁾
U 34 DC EU 34 DC	2,200 3,400	201-310¹⁾ 74-310¹⁾	2,000	82-310¹⁾	3,000	Spheroidal-graphite cast iron
RU 56 DC EU 56 DC	5,600	98-310	2,000⁵⁾	98-310	2,500⁵⁾	Spheroidal-graphite cast iron

¹⁾ Flange width for DC 16/25 = 90-310 mm
²⁾ Steel travel wheels optional
³⁾ Plastic travel wheels on request
⁴⁾ Flange width for DC 16/25 = 90-200 mm
⁵⁾ From flange width 106 mm

The specified curve radii apply for normal applications. Contact the manufacturer or his representative for frequent curve travel operation (e.g. automatic installations).